Sublimation MDF square wall clock

Description

Sublimation MDF square wall clock is a circle shape wood clock.  Furthermore this medium density fibre wood is normally cut by a laser cutter.  Sublimation MDF square wall clock is ideal for a promotion item.   Sublimate any logo or slogan onto this expensive looking promotional item. Use this wood item as a decorative piece in any decor environment.   Included in the set is the clock work and watch arms.  Finally it is conveniently package 5 units in a pack.

How to sublimate MDF wood clocks:

• Firstly adjust the pressure of the heat press to be desirable.
• Secondly set the temperature to 200°C and the time to 30 seconds.
• Wait for the press to get to 200°C.   Then measure the printing area of the item you wish to print.
• Now prepare the artwork and make sure you insert the correct sizes as measured. Furthermore remember to add a 5mm bleed.
• Print the artwork in reverse. Now make sure you print on the correct side of the sublimation paper as indicated.
• Use a quality sublimation ink and paper to ensure a brilliant print.
• Next cut the artwork out carefully.  To be specific there should not be any hair lines or dots that you do not want on your artwork.
• Remove the plastic protection layer from the clock.
• Then placed the artwork facing down onto the MDF wood clock.  Just as important check that the artwork is straight and smooth.
• Next secure it with heat tape.
• You can place multiple items in the heat press to enhance production if you have a large press.
• Before closing the heat press cover the items with a teflon sheet.
• Close the heat press and wait for 30 seconds.
• When the buzzer goes off, remove the items from the heat press and cold peel the paper from the wood items.
• Insert the clock work into the clock.  Add a battery and set the time.
• Perfect you are now ready to produce more MDF wood clocks.

For more information watch the training video.