10oz Flare mug

Description

This is sublimation 10oz flare mug. This mug makes sipping warm beverages easy. This 10oz flare mug is perfect for the elegant visitors are present. Our AAA grade mug is dishwasher safe and microwave proof, that makes it ideal for daily use. In fact this sublimation 10oz flare mug are perfect to print images, family photos or logos. It is certainly the best gift.

Steps how to sublimate a mug:

• First take your mug press with the 10oz mould and insert the 11oz sublimation mug into the mould.
• Make sure the mug is firmly gripped  to ensure a brilliant print.
• If the pressure is desirable take the mug out of the press and set the temperature to 177 degrees Celsius and the time to 240 seconds.
• While waiting for the press to get to 177 degrees Celsius measure the  mugs printing area.
• To ensure a successful print leave at least 5mm at the top and bottom, also leave  20mm on each side of the mugs handle. Our suggestion for an 11oz mug artwork is 85 x 200mm.
• Print the artwork in reverse and cut it out carefully.
• Place the print facing down onto the mug and ensure it is straight and smooth, then use heat tape to keep your print in position.
• Use a clean piece of paper around the mug to ensure the mould is protect from access ink.
• By now your press should be at 177 degrees Celsius.
• After that, place the mug in the mould and clamp the mug in place .
• When the buzzer go off remove the mug carefully  but remember the mug is hot  and will burn you if you are not careful.
• Finely hot peal the paper from the mug to prevent a ghost image on the mug.
• PERFECT, now you are ready to make some more mugs…

Click on the link to to watch a training video.